Socket & Switch Fire Gasket (1.8 mm)

The Firesure™ Socket and Switch Gaskets contain Intumescent Material which in the event of a fire expands to seal against the passage of smoke and fire. Used within socket and switch boxes that are fitted into plasterboard, brick or blockwork.

The Gaskets are easy to install with no screws or assembly required. They can be simply stuck inside to the back face of the box.

To fix, remove backing tape on back of gasket and press into place on the inside rear face of the box.

The Gasket meets all the requirements of the UK Building Regulations

Available in two sizes—Single & Double

Suitable for both shallow and deep depth boxes.

60 minute Fire Tested to the relevant parts of BS 476: Pt 20:1987 & BS 476: Pt 22: 1987

And BS EN 1363-1: 2012 and BS EN 1366-3: 2009

In excess of 2 hours fire rating in metal boxes

Suitable for single and double shallow and deep depths.

Tested Back to Back not offset in both Fire and Acoustic Tests.

Acoustically Rated (back to back) to 64dB

Standard delivery cost is £12.50

Subtotal over £250 delivery is FREE

We use Stripe gateway to fulfill card payments. We will use personal data about your identity, including information that you provide, to perform verification services for Stripe to reduce fraud and enhance security.