Face Fix Fire & Smoke Seal (Doors)

Enhance the safety of your fire doors with our reliable intumescent fire door strips. Designed to swell when exposed to fire, these strips effectively prevent the spread of flames through the gaps at the top and sides of fire doors. For comprehensive protection against both fire and cold smoke, consider fitting seals with an additional brush seal.

Choose from our range of rebated or surface-mounted intumescent fire door seals, specially engineered to resist fire for either 30 or 60 minutes. These seals are suitable for FD30 or FD60 fire doors, providing you with the appropriate level of fire resistance. Whether you have single or double fire doors, we offer fire door seals that cater to your specific requirements.

Installation is made easy, as our fire door seals can be conveniently fitted in either the frame or the door leaf. Rest assured that our seals are crafted with quality and durability in mind, ensuring reliable performance in the event of a fire. Protect lives and property with our comprehensive fire door seal solutions.

A intumescent fire only, or fire and smoke seal for surface mounting to the inner edges of the door frame opposite the edges of the door for 30 and 60 minutes protection

Standard delivery cost is £12.50

Subtotal over £250 delivery is FREE

We use Stripe gateway to fulfill card payments. We will use personal data about your identity, including information that you provide, to perform verification services for Stripe to reduce fraud and enhance security.

When installing a fire door seal, you have to make sure there is a gap of at least 2.5mm to 3mm between the head of the door and frame and also down the closing side of the door and frame. If the frame has been painted or varnished then make sure the surface has been cleaned thoroughly, removing all grease and dust and dried thoroughly. New wooden frames that have not been painted or varnished should be sealed with a wood sealer or painted/varnished.

If fire and smoke seal required then fix brush smoke seal first, peel off the backing tape and then press into position butted to the edge of the frame stop opposite the door edge, then peel off the backing tape from the intumescent strip and press into place butted up to the smoke seal.