Fire Rated Flexible Pipe Wraps (IPW range)

Pipe Wraps offer a simple and more economical alternative to Intumescent Pipe Collars for firestopping plastic pipework and electrical trunking in walls and floors.

A flexible Intumescent sleeve designed to fit around plastic pipe work. The Intumescent material is enclosed in a plastic sleeve and secured by means of adhesive tabs.

Our pipe wraps are designed to fit around the pipe to be protected and backfill the aperture with a sand and cement mix or fire mortar or if a tight fit, then seal both faces with Firesure® intumescent acrylic sealant.

- The intumescent material is inserted in a plastic sleeve and positioned by means of adhesive tabs.

- You then slide the wrap up into the slab or wall. If the hole is larger once the wrap is in place, backfill the hole around the pipe and wrap via a fire mortar, cement-based mix, or other suitable material to repress the intumescent material and allow it to expand internally.

- For smaller gaps, make sure to use the Firesure® intumescent mastic sealant.

When installed properly, our pipe wraps can offer excellent protection against potential fires originating either outside, inside or travelling from other structures, helping to contain the spread of fires.