Description
FPC Intumescent Fire Pillows are fibreglass covers containing:
Mineral Fibres
Non Combustible Agents
Intumescent material
Other fire retardant additive
When operating temperatures are reached in a fire the contents of the FPC Intumescent Pillow stick together and start to expand so closing the small gaps and crevices around the penetration, until they harden to form a smoke and flame tight mass.
Application
FPC Intumescent Pillows are simple to install and just as easy to remove, making them the ideal solution when temporary fire stopping is required around cables.
Cable trays and other similar penetrations, or when work is in progress prior to permanent fire stopping the application.
When packed together as directed the FPC Intumescent Pillows will provide up to four hours fire protection.
Installation
For wall penetrations lay a single width of FPC Intumescent Pillows, overlapping at the edges, and build up a tight barrier of pillows around each penetration until the opening is firmly packed.
For floor penetrations lay four layers of pillows on or within a 50mm square steel mesh tray using the above procedure and cover with further framework of steel, mesh stay will require fixing to the main floor using non combustible fixings.
Contact Us for Intumescent Fire Pillows
Sizes Available
300 x 200 x 35
300 x 150 x 35
300 x 100 x 35
Related Products
Steel Face Plates
Mild Steel Grilles/Steel Face Plates Description A mild steel grille for use in domestic, commercial and industrial properties. Available in…
Intumescent Slab
intumescent coated slabs Description ISB Intumescent Slab/Batt comprise a slab coated both sides with an Intumescent ablative coating. The slab…
