Intumescent Mastic

Complies With Fire Requirements
Tested to BS476 Pt 22


An Intumescent Fire Retardant Acrylic Sealant is a one part, ready to use sealant designed for internal perimeter pointing of fire rated door and window frames where the integrity of the fire walls or partition needs to maintained. Intumescent qualities enable the material to swell under heat conditions, producing a fire and smoke resistance seal.Used for internal perimeter pointing of fire rated doors and window frames. Also used for sealing joints, irregular holes in fire walls and for filling gaps between pipes and services that penetrate fire walls and partitions.


Clean all joins of loose dirt, dust, old sealants and other contaminants that could impair adhesion. Surfaces should be cleaned and degreased by wiping with a safe solvent impregnated cloth. Do not apply in temperatures below 5 degrees centigrade. When sealant is used in a joint configuration masking tape should be used to prevent contamination to adjacent substances and ensure a neat sealant line. Remove the masking tape immediately after tooling. Tool the joint within 5 minutes of application to give a smooth professional finish.

Typical Properties

  • Slump                                                                         Nil
  • Shrinkage                                                             Approx 12%
  • Staining                                                                     Nil
  • Tack Free Time                                                 30 - 45 minutes
  • Water Resistance                                          Good when fully cured
  • UV Resistance                                                          Good
  • Joint movement                                             Plus / Minus   7.5%
Health and Safety

Has been proved to be a safe material to handle when reasonable care has been observed.
Cosh sheet available on request
Please contact us on 01384 633660 or e-mail Sales@fpc-uk.com